Surface protection film has a low level of solvent or water-based acrylic adhesive applied to a tough co-extruded polyethylene (LDPE) carrier. The standard colours are Clear, Blue and Green.
Glass protection film has excellant UV properties and can withstand extreme weather conditions. Glass protection film is ideal for protecting glass from plaster, paint, render and other construction trades where the glass is susceptible to damage.
film is slit and re-wound in house to customers’ requirements and is available in widths from 4mm – 1250mm, and lengths from 100m
films can be printed to customers specification, subject to minimum order quantities
Curtain wall tapes It is pressure sensitive Double side acrylic adhesive tape for bonding glass to painted and unpainted metal which is used for structural projects.
Our Acrylic Tapes are available in Roll form up to 8.5 mtr lengths, properly packed in Cartons for easy handling. These Acrylic tapes have a Red and White P.E release liner to maintain a good glazing average depending upon the requirements.
Contact surface must be thoroughly cleaned with cleaning solvents. Place the Acrylic tape very cautiously and carefully making sure that tape is in contact with all surfaces. Apply the tape on Aluminium or the first surface with the liner on , then firmly rubbing it down. Remove the line just prior to bonding of the second surface / glass and apply firm pressure to ensure full contact.
Greater bonding strength
Damps vibration and absorbs impact
Effective in corrosion protection